HEOS Power Usage​

HEOS 1 HS2

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 3.5W 0.3W*
WiFi 4.1W 0.3W*
Bluetooth 4.1W 0.3W*
USB 4.5W 0.3W*
All Ports 4.5W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connections

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS 3 HS2

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 3.7W 0.3W*
WiFi 3.9W 0.3W*
Bluetooth 3.9W 0.3W*
USB 4.3W 0.3W*
All Ports 4.3W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS 5 HS2

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 3.5W 0.3W*
WiFi 5.0W 0.3W*
Bluetooth 5.1W 0.3W*
USB 5.4W 0.3W*
All Ports 5.4W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS 7 HS2

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 3.9W 0.3W*
WiFi 5.6W 0.3W*
Bluetooth 5.4W 0.3W*
USB 5.9W 0.3W*
All Ports 5.9W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS Amp HS2

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 3.5W 0.3W*
WiFi 4.1W 0.3W*
Bluetooth 3.8W 0.3W*
USB 4.2W 0.3W*
All Ports 4.4W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS HomeCinema

Power Consumption
Soundbar

Network Port Quick Start Mode Deep Standby Mode
Ethernet 4.8W 0.49W*
WiFi 4.3W 0.49W*
Bluetooth N/A N/A
USB 5.7W 0.49W*
HDMI IN 4.8W 0.49W*
HDMI OUT (ARC) 5.2W 0.49W*
OPT 4.0W 0.49W*
COAX 3.9W 0.49W*
All Ports 5.9W 0.49W*
Default Time to Enter
Soundbar

Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth N/A N/A
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
HDMI IN 20 min of no playback, no operation, and no network activity after HDMI device and TV are put into standby 60 min in QSM with no HDMI connections and no network connection
HDMI OUT (ARC) 20 min of no playback, no operation, and no network activity after TV is put into standby 60 min in QSM with no HDMI connection and no network connection
OPT 20 min of no playback, no operation, and no network activity after OPT device is put into standby 60 min in QSM with no network connection
COAX 20 min of no playback, no operation, and no network activity after COAX device is put into standby 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after connected devices are put into standby 60 min in QSM with no HDMI connections and no network connection
Subwoofer

Network Port Quick Start Mode Deep Standby Mode
Wireless 0.76W -
Subwoofer

Network Port Quick Start Mode (QSM) Deep Standby Mode
Wireless 10 sec after soundbar is put into QSM or Deep Standby Mode -

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS AVR

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 4.2W 0.4W*
WiFi 4.5W 0.4W*
Bluetooth 4.3W 0.4W*
USB 4.8W 0.4W*
HDMI IN 4.6W 0.4W*
HDMI OUT (ARC) 4.5W 0.4W*
OPT 4.3W 0.4W*
COAX 4.3W 0.4W*
All Ports 5.6W 0.4W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
HDMI IN 20 min of no playback, no operation, and no network activity after HDMI device and TV are put into standby 60 min in QSM with no HDMI connections and no network connection
HDMI OUT (ARC) 20 min of no playback, no operation, and no network activity after TV is put into standby 60 min in QSM with no HDMI connection and no network connection
OPT 20 min of no playback, no operation, and no network activity after OPT device is put into standby 60 min in QSM with no network connection
COAX 20 min of no playback, no operation, and no network activity after COAX device is put into standby 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after Bluetooth connection is disconnected and connected devices are put into standby 60 min in QSM with no HDMI connections and no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS BAR

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 3.7W 0.4W*
WiFi 4.9W 0.4W*
Bluetooth 3.7W 0.4W*
USB 4.1W 0.4W*
HDMI IN 4.3W 0.4W*
HDMI OUT (ARC) 3.8W 0.4W*
OPT 3.8W 0.4W*
COAX 3.8W 0.4W*
All Ports 5.9W 0.4W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth 20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection 60 min in QSM with no network connection
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
HDMI IN 20 min of no playback, no operation, and no network activity after HDMI device and TV are put into standby 60 min in QSM with no HDMI connections and no network connection
HDMI OUT (ARC) 20 min of no playback, no operation, and no network activity after TV is put into standby 60 min in QSM with no HDMI connection and no network connection
OPT 20 min of no playback, no operation, and no network activity after OPT device is put into standby 60 min in QSM with no network connection
COAX 20 min of no playback, no operation, and no network activity after COAX device is put into standby 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after Bluetooth connection is disconnected and connected devices are put into standby 60 min in QSM with no HDMI connections and no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS SUBWOOFER

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 2.9W 0.3W*
WiFi 3.4W 0.3W*
Bluetooth N/A N/A
USB 3.7W 0.3W*
All Ports 4.0W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
WiFi 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth N/A N/A
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity 60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS DRIVE HS2

Power Consumption
Network Port Quick Start Mode Deep Standby Mode
Ethernet 28.6W 0.3W*
Bluetooth N/A N/A
USB 29.0W 0.3W*
All Ports 30.7W 0.3W*
Default Time to Enter
Network Port Quick Start Mode (QSM) Deep Standby Mode
Ethernet 20 min of no playback, no operation, and no network activity 60 min in QSM with no network connection
Bluetooth N/A N/A
USB 20 min of no playback, no operation, and no network activity after stopping playback at the end of queue 60 min in QSM with no network connection
All Ports 20 min of no playback, no queue, no operation, and no network activity 60 min in QSM with no network connection

*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.
It has four independent netwark module.
The output-stage amplifier operators as a matrix for the four independent reproduction.
This is a professional product for CI.
In other words, shutting down the network port unless the user intends it will betray users' expectations. For that reason CE declaration excludes Lot 26 conformance.